Maintenance Lubricants and Penetrating Fluids
MSC Tri-Flow TF200271 16 oz (12oz Net Fill) Aerosol with PTFE Penetrant/Lubricant Brown, -60°F to 475°F
Tri-Flow TF200271 16 oz (12oz Net Fill) Aerosol with PTFE Penetrant/Lubricant Brown, -60°F to 475°F
MSC Synco Chemical 21030 3 oz Tube Synthetic General Purpose Grease Translucent White, Food Grade, 450°F Max Temp, NLGIG 2,
Synco Chemical 21030 3 oz Tube Synthetic General Purpose Grease Translucent White, Food Grade, 450°F Max Temp, NLGIG 2,
Uline Liquid Wrench White Lithium Lubricant | White | 1 EA
Outdoor lubrication that wont freeze melt or wash off, Reduces friction for metal-to-metal contact like hitches hinges and rails, Operates in sub-zero temps down to -40F, Rust inhibitor
Michigan Valve & Fittings Inc Krazy Glue, 0.7 w
This item has a minimum qty of 4 per supplier requirements.
MSC CRC 1003312 16 oz Aerosol High Temperature Chain & Cable Lubricant White, 8 to 325°F, Food Grade
CRC 1003312 16 oz Aerosol High Temperature Chain & Cable Lubricant White, 8 to 325°F, Food Grade
Cole-Parmer Fomblin Y L-VAC 25/6 PFPE Pump Inert Oil, 1 kg
The YL-Vac PFPE vacuum pump oils are formulated to ensure optimum pump performance and pump life They are ideal for use in chemical processes which require inert mechanical vacuum pump oils.
Sigma Aldrich Fine Chemicals Biosciences Vacuubrand Chemistry vacuu1EA
Three-stage chemistry-design diaphragm pumps are an excellent SOLUTIONon for continuous oil-free pumping of corrosive gases and vapors and meet many difficult requirements. The three-stage construction provides the advantageous combination of high pumping speed and very low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics.Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. The MD 4C NT with gas ballast valve is optimally prepared for pumping condensable vapors due to the very good ultimate vacuum (even with gas ballast) as well as for high boiling solvents. The new NT-series features further improve performance data and superior vapor tolerance.Pump supplied completely mounted ready for use with manualOutstanding chemical resistance and superior vapor toleranceExceptionally high performance even at low vacuumExcellent ultimate vacuum even with gas ballastMa
Ted Pella Inc PELCO Pro C1000 Cyanoacrylate Glue, 20ml
PELCO Pro C1000 CA glue has a high viscosity and a longer curing time. Ideally suited when more careful positioning is needed, surfaces are not smooth or for gaps up to 0.008” (200µm). Curing time 10-15 seconds.
Hanna Pharmaceutical Supply Co., Inc. KOOL LUBE 3 CLIPPER SPRAY 14OZ
Kool-Lube 3 14oz. Aerosol Cools, lubricates and cleans blade while clipping
Please note: This item is nonrefundable, non-returnable and non-cancelable once order is placed.
Electron Microscopy Sciences Apiezon High Vacuum Grease Type L 25 GR
Grease L is a petroleum hydrocarbon grease with a very low vapor pressure (@20 degree C of 8x10-11 torr) and high vacuum grade. It contains no additives. Type L is widely used in the stationary phase of gas liquid chromatography, and may be used on all ground joints in a vacuum system (not for stopcocks).
Solubility: in Ethanol at 20 degree C-0.003%; 60 degree C-0.005%; 100 degree C-0.011%; 150 degree C-0.011%.
Grease L softens and melts at about 47 degree C and it is not recommended for joints where temperatures exceed more than 30 degree C in use. Working temperatures range is between 10-30 degree .
Opti Temp OPTISHIELD II CORROSION 1 GALL
OptiShield II Low Conductivity Formula OptiShield II corrosion inhibitor has been specially formulated to provide corrosion protection in systems such as laser, welding, induction, and other equipment where "electrical conductivity" of the fluid is of concern
Essendant WD-40 Smart Straw Spray Lubricant 11 oz Aerosol Can
WD-40 Smart Straw Spray Lubricant 11 oz Aerosol Can
World Precision Instrument Barrier Milk Instrument Protector, Lubricant
Barrier Milk Ready to Use Spray helps prevent corrosion of instruments when used prior to sterilization. Protects and extends the life of instruments during autoclaving. Simply spray the instrument directly before autoclaving with the unique water-based blend of lubricants and corrosion inhibitors. The fine mist works its way into hinges and box locks as well as covering all instruments with protection.